DIY Bunny Topiary

Today, I decided to make this wire form into a bunny topiary.  Topiaries are surprisingly easy to make yourself, you will be amazed at how simple it is.  
DIY Bunny Topiary|Designers Sweet Spot|www.designerssweetspot.comI like rabbits. They inspire me in the spring time. I have several different bunny statues, figurines, and wire forms. I don’t know what it is about them that I like, perhaps they remind me of Peter Rabbit by Beatrix Potter. How can you not love Peter Rabbit?
One of my favorite pieces is this french wire bunny form. It was originally from Pottery Barn and has a hole in the back to put Easter Eggs in it.  I have used it for a number of years, but now it’s getting old and rusty.DIY Bunny Topiary
Bunny Topiary materials
You will need a bunny topiary form or wire form that you have made, 3-5 small ivy plants of any variety, and several bags of sphagnum moss. I bought my moss at the Dollar Store for a buck a piece. Best deal EVER!
You will also need some topiary pins. I got mine for 50 cents at the greenhouse when I bought the ivy plants. In a pinch, hair pins work just as well.
First soak the dried moss in a bucket of water for about 15 minutes. This will be rather messy, I suggest you do in the sink.
After the moss has soaked, fill the cavity of the form with the wet moss. Be sure and pack it in as tightly as possible.
My form has rather small openings between the wires, a flat edge blade helped to fill those little spaces. Keep in mind that not all small cavities need to be filled. It is just as interesting to leave some of them (the ears for example) without the moss.
After the form is filled it is time to plant. Use a screw driver or awl to poke holes between the wires for the plants.
I purchased 2 1/2″ English ivy plants for this project. After removing them from the pot, I cut them up into small pieces, roots and all, with a sharp knife.
Stick the ivy roots down into each hole using a screw driver or awl. Then pin each plant to the wire form, spreading the ivy shoots around the form and pinning as you go. Plant and pin, plant and pin.
Remember, the moss in the small cavities will dry out the fastest, and your plants will have the least chance for survival if they are growing there. Avoid planting in areas to small for the roots to fully develop.
After a while, the wire form will disappear behind the ivy. I added this little butterfly from the craft store, I couldn’t help myself. I love butterflies!
Bunny Topiary finished
Planted topiary forms need to be kept in a shady area. They will also drip water, so be sure to have a tray of some sort underneath it (mine is hidden under the burlap). When the moss dries out completely, submerge the entire form in the sink or a bucket of water for 10-15 minutes. You can also add liquid fertilizer to the water occasionally. Soak, let drain and enjoy.
This entire project cost me less than $10.00. I can’t wait to use it on my Easter Buffet!
Linking up at Thistlewood Farms and Serendipity and Spice today!

Designer Mom
Pin this post for later!
DIY Bunny Topiary|Designers Sweet Spot|

Join the DIY Revolution!

Subscribe to get the building plan for my MILK CRATE OTTOMAN.

Powered by ConvertKit

Don’t miss out!



  1. […] I found the blue hydrangea plant recently at Costco. My cross dripped a bit after it hung for a while, you can see a bit of moisture on the lower part of the door. I will have to remember to let it drain for a bit before hanging it up after watering. I have planted the Bunny Topiary in past years, you can read that tutorial here. […]

Leave a Reply

Your email address will not be published. Required fields are marked *